Construction
First sew out the FSL basket/fan and trim using one sheet of water soluble stabilizer.
Be sure to use the same color thread in the bobbin as on the top.
Wash well with soapy hot water to wash out all of the glue. Set aside to dry.
1. Sew design onto fabric. If sewing on store bought pillowcase be sure to leave enough room to clear the hem.
3.Sew FSL Basket/Fan onto fabric.
4. Cut away the fabric from behind the basket/fan and trim bottom edge of fabric
5. Using a straight stitch sew each section of FSL trim onto edge. Be sure not to leave any gaps between sections. Trim close to fabric then sew a 2mm zig zag over the straight stitch on the trim and fan/basket.
How
to do the cutwork.
After you sew the light blue. Remove frame from machine and cut out the inside of each section. Place back on machine and continue to sew.