Putting together
a large design doesn't have to be scary.
I put together a tutorial on how I combine designs for multi hooping.
1. Make a template of your hoop. Use a Piece of cutaway stabilizer and trace the inside of your hoop.
2.Cut out and mark the center.
3.Place masking tape along the bottom edge to give you a bottom guide. Tape template to center.
4. Make your center onto fabric
6 .Now prepare your design template.
Take all the designs into an embroidery program and print each piece. There are a couple of free programs available for download. I use Wilcom True Sizer. Be sure to print the large pattern to use as a guide to assemble each piece. It will be in a DST format.
7 .Cut down each part and use the large pint to place each piece in the right place.
8 .Transfer the design template to the fabric
9. Use a ruler to make sure you are straight to your bottom guide.
10. Using a washable fabric marking pencil make the center point of each section onto the fabric
11. Now you should have all of your center marks transferred to your fabric.
.
12. Start with the center and tape down your hoop template linning up the center mark and use your bottom guide to make sure you are straight.
12. Start with the center and tape down your hoop template linning up the center mark and use your bottom guide to make sure you are straight.
12.
Prepare your hoop. Hoop a cutaway stabilizer.
14.
Spray the inside lighty with a temporary adhesive spray. 
15. Lay the fabric on your hoop using your hoop template to guide your placement. Remove the hoop template and sew. Repeat with each part.
PERFECT every time.